Tools Required to Change Brake Rotors and Pads

February 01, 2023

Changing the brake rotors and pads on your car is a crucial maintenance task that should be done regularly to ensure the safety of yourself and others while driving. Here is a list of the tools required to change the brake rotors and pads on your car:

1. Jack and Jack Stands: To get access to the wheels, you'll need to lift the car off the ground. A hydraulic floor jack and a set of jack stands can be used to safely raise the car.

2. Lug Wrench: A lug wrench is required to remove the wheel lug nuts that hold the wheel in place. You should have a lug wrench that fits the nuts on your car, which can usually be found in the trunk of your car.

3. Caliper Piston Compression Tool: This tool is needed to compress the brake caliper piston so that the old pads can be removed and the new ones can be installed.

4. Brake Cleaner: Brake cleaner is used to clean the rotors, calipers, and other components of the braking system to ensure that there is no debris that could cause the brakes to malfunction.

5. C-Clamp: A C-clamp is used to apply pressure to the caliper piston, compressing it enough to allow the old brake pads to be removed.

6. Pliers: Pliers are required to remove any retaining clips or pins that hold the brake pads in place.

7. Screwdrivers: Screwdrivers are required to remove the screws or bolts that hold the caliper in place, allowing you to access the brake pads.

8. Hammer: A hammer may be needed to tap the brake rotor and caliper if they are stuck and need to be loosened.

9. Brake Grease: Brake grease is used to lubricate the contact points between the brake pads and caliper to prevent noise and extend the life of the brake pads.

These are the basic tools required to change the brake rotors and pads on your car. It's important to have the correct tools and to use them properly to ensure that the job is done correctly and safely. Additionally, it's recommended to consult your vehicle's owner manual for specific instructions for your make and model. If you're not confident in your abilities, it's always best to seek the assistance of a professional mechanic.

Related Products (Click to buy one):